Starter Clutch Assembly - Honda MUV700 big red Service Manual

AL TERNA TOR/STARTER CLUTCH
11-12
Check the starter driven gear teeth and needle bear-
ing for wear or damage.
Measure driven gear boss 0.0.
SERVICE LIMIT: 51 .61 mm (2.032 in)
STARTER CLUTCH ASSEMBLY
Lubrica te the sprag clutch with engine oil and install
it into the clutch out er with the flanged side facing
the flywheel side.
Apply locking agent to the starter clutch bolt
threads. Install the flywheel onto the clutch outer
and the clutch bolts.
Hold the flywheel with the special tool and tighten
the bolts.
TOOL:
Flywheel holder 07125-0040001
or
equivalent commer-
cially available in
U.S.A.
TORQUE: 30 N 'm (3.1 kgf·m, 22 Ibf.ft)
Install the starter driven gear while turning
it
clock-
wise.
o
FLYWHEEL HUILU'"
DRIVEN GEAR