Starter Clutch Disassembly/Inspection - Honda MUV700 big red Service Manual

Remove the needle bearing and thrust washer, and
the woodruff key.
STARTER CLUTCH DISASSEMBLY I
INSPECTION
Make sure that the starter driven gear turns clock-
wise smoothly and does not turn counterclockwise.
Remove the driven gea r while turning it clockwise.
Hold the flywheel with the special tool and remove
the starter clutch bolts.
TOOL:
Flywheel holder on25-0040001 or
equivalent commer-
cially available in
U.S.A .
Remove t he sta rter clutch assembly from the fly -
wheel.
Remove the sprag clutch from the clutch outer.
Check the clutch outer and sprag clutch for abnor-
mal wear or damage.
AL TERNATORISTARTER CLUTCH
DRIVEN
CLUTCH OUTER
SPRAG CLUTCH
11-11