Honda MUV700 big red Service Manual page 346

DRIVETRAIN SYSTEM
14-36
Install the valve body cover stay and two bolts, and
tighten the bolts.
INSTALLATION
Clean the mating surfaces of the valve body assem·
bly and front crankcase cover, being careful not to
damage them.
Coat new O-rings with engine oil and install them
into the grooves in the oil joint collars.
In stall the four joint collars and a new gasket.
Install the shift valve body assembly with the six
bolts and tighten bolts securely.
Connect the following:
- shift solenoid valve A 2P black connector
- shift solenoid valve B 2P brown connector
- AJT
clutch PC solenoid valve 2P black connector
COVER STAY
BOLTS