Honda MUV700 big red Service Manual page 564

ELECTRIC STARTER
23-10
Install the following:
- brush holder
- brush set A
- terminal bolt
- new O-ring
- terminal stopper with the cutout facing as shown
- insulator
- washer
- nut
- brush set B
- screwlwasher
- brush springs
Install the brushes into the brush holder.
Install the armature in the motor case so the case
groove is facing the rear cover side.
When installing the armature into the motor case,
hold the armature tightly to prevent the magnet of
the case from pulling the armature against it.
I
NOTICE
I
The coil may be damaged if the magnet pulls the
armature against the case.
D-RING
BRUSH
SETA
BRUSH
HOLDER
TERMINAL STOPPER
BRUSH SeT B SCREWI BRUSH
SPRINGS
BRUSH SPFIIN(;S
MOTOR CASE
ARMATURE GROOVE