Shift Valve Body; Emergency Valve Function; Shift Valve Body Removal - Honda MUV700 big red Service Manual

DRIVETRAIN SYSTEM
SHIFT VALVE BODY
I
NOTICE
I
Do not drop or strike the solenoid valves when ser·
vicing. Excessive shock may damage the solenoid
valve.
EMERGENCY VALVE FUNCTION
NOTE
• The emergency valve is used when the hydraulic
pressure is shut off by the faulty NT dutch PC
solenoid valve (stuck; mechanical lock), and the
vehicle is hindered from running. Open the
bypass oil circuit manually to supply hydraulic
pressure. (In this case, the transmission will be
fixed in the 2nd range and the vehicle creeps dur-
ing idling .)
• The stopper bolt that operates the emergency
vallis is secured with the lock plate. When trou-
ble occurs, remove the lock plate and turn the
stopper bolt all the way in to activate the emer-
gency valve.
REMOVAL
Remove the following:
- engine front cover (page 3-6)
- left side panel (page 3· 1 11
- wire clip
- two 6 x 18 mm bolts and washers
- 6 x 14 mm bolt and setting washer
- valve body cover
Clean around the
Disconnect the following:
valve body wlrh
compressed
aIr ro
remove dust. dm
andforel{}n
ma renai
14-28
- shift solenoid valve A 2P black connector
- shift solenoid valve B 2P brown connector
- AfT clutch PC solenoid valve 2P black connector
6xlBmmBOlTS VAlVEBODYCOVEA