Gear Selector Lever Linkage Assembly; Gear Selector Cable Adjustment - Honda MUV700 big red Service Manual

SUB·TRANSMISSION/GEARSHIFT LINKAGE
ASSEMBLY
Apply grease to the pivot bolt groove.
Set the spring onto the selector lever and insert the
pivot bolt into the arm and lever.
Install the pivot nut.
Apply grease to the sliding surface of the arm pivot
bolt (washer-bolt).
Install the selector lever assembly and the bolt w hile
hold the lever.
Tighten the arm pivot bolt (washer-bolt).
Tighten the lever pivot nut.
TORQUE: 26 N·m (2.7 kgf·m , 20 Ibf·ft)
Install the following:
- collar
- gear selector cable
- washer
- new cotter pin
- gear selector lever grip
Adjust the gear selector lever cable (page 12-16).
GEAR SELECTOR CABLE
ADJUSTMENT
12-16
Set the gear selector lever to the neutral (N) posi~
tion.