02.99
3.10
File functions
Saving data
Loading data
Siemens AG 2000. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital Descr. of Functions HLA Module (FBHLA) – 04.00 Edition
The drive type is recorded in the MD files when drive machine data are saved.
Thus, the comment is inserted only if the entry "MdFileDriveType=TRUE" has
been set in the [Compatibility] section of INI file "ib.ini". This setting is the de-
fault.
It is only possible to load MD files to the drive which are suitable for the relevant
drive type. If you attempt, for example, to load an MD file for SLM to an HLA
module, the following message will be displayed:
Fig. 3-26
Menu display "Dialog box for loading machine data"
Fig. 3-27
Menu display "File functions"
3 Start-Up
3.10 File functions
3-77