Docking Beep; Leash Alarm - Datalogic PowerScan 9500 Series Product Reference Manual

Enter/Exit Programming Mode

Docking Beep

Enables/disables a beep indication when the handheld is placed in the Base
Station.
$CBTCB01(CR)
Docking Beep = Enable

Leash Alarm

This setting specifies the number of seconds to sound the Leash Mode
beeps (three per second) when the handheld goes out of range. This is
especially useful in instances where the reader might inadvertently have
been placed in a bag or cart.
For this mode to be effective, the reader must be linked to the Base Station.
If the reader is asleep or disconnected from the Base Station, there is no way
for it to know where it is relative to the Base Station because communication
is not active between the devices.
$CBTLB01(CR)
Leash Alarm = 1 Second
212
DEFAULT
$CBTCB00(CR)
Docking Beep = Disable
DEFAULT
$CBTLB00(CR)
Leash Alarm = Disabled
$CBTLB02(CR)
Leash Alarm = 2 Seconds
PowerScan™ PD9530/PBT9500/PM9500