Qr Code Set Length 1; Qr Code Set Length 2 - Datalogic GRYPHON GD4500 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

QR Code Set Length 1

This feature specifies one of the bar code lengths for "
. Length 1 is the minimum label length if in Variable Length Mode, or the first fixed
229
length if in Fixed Length Mode. Characters can be set from 0001 to 7,089 characters in
increments of 0001 (pad with zeroes).
See "
Select QR Code Length 1 Setting
$CQRL1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

QR Code Set Length 2

This feature specifies one of the bar code lengths for "
. Length 2 is the maximum label length if in Variable Length Mode, or the second
229
fixed length if in Fixed Length Mode. Characters can be set from 0001 to 7,089 charac-
ters in increments of 0001 (pad with zeroes).
See "
Select QR Code Length 2 Setting
$CQRL2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
230
GRYPHON™ I GD/GBT/GM4500
Set Length 1" on page 297

0001 = Length 1 is 1 Character
Set Length 2" on page 298

Length 2 i s 7,089 Characters
for detailed instructions on setting this feature.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
for detailed instructions on setting this feature.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
2D SYMBOLOGIES
QR Code Length Control" on page
Appendix D, Keypad represent-
CANCEL
QR Code Length Control" on page
Appendix D, Keypad represent-
CANCEL