Data Matrix Length Control; Data Matrix Set Length 1 - Datalogic PowerScan Series Product Reference Manual

DATA MATRIX

Data Matrix Length Control

This feature specifies either variable length decoding or fixed length decoding for this
symbology.
Variable Length:
be set.
Fixed Length:
$CDMLC00
Data Matrix Length Control = Fixed Length

Data Matrix Set Length 1

This feature specifies one of the bar code lengths for "
page 225
fixed length if in Fixed Length Mode. Characters can be set from 0001 to 3,116 charac-
ters in increments of 0001 (pad with zeroes).
See "
Select Data Matrix Length 1 Setting
$CDML1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
For variable length decoding, a minimum and maximum length may
For fixed length decoding, two different lengths may be set.
. Length 1 is the minimum label length if in Variable Length Mode, or the first
Set Length 1" on page 341

0001 = Length 1 is 1 Character

Data Matrix Length Control = Variable Length
for detailed instructions on setting this feature.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
ENTER/EXIT PROGRAMMING MODE
$CDMLC01
Data Matrix Length Control" on
Appendix G, Keypad represent-
CANCEL
PRODUCT REFERENCE GUIDE
225