Code 128 Set Length 1 - Datalogic PowerScan 9500 Series Product Reference Manual

Code 128 Set Length 1

Specifies one of the bar code lengths for
is the minimum label length if in
length if in
ters only. The length can be set from 1 to 80 characters.
Table 6
detailed instructions on setting this feature.
Table 6. Code 128 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 128 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC8L1
Select Code 128 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Fixed Length Mode. Length includes the bar code's data charac-
provides some examples for setting Length 1. See
EXAMPLES
01 Character
'0' and '1'
01 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
Code 128 Length
Variable Length Mode, or the first fixed
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
Control. Length 1
page 283 for
80 Characters
'8' AND '0'
117