Led And Beeper Indications - Datalogic PowerScan PM9501 Series Quick Reference Manual

LED and Beeper Indications

The reader's beeper sounds and its LED illuminates to
indicate various functions or errors on the reader. An
optional "Green Spot" also performs useful functions. The
following tables list these indications. One exception to
the behaviors listed in the tables is that the reader's func-
tions are programmable, and so may or may not be turned
on. For example, certain indications such as the power-up
beep can be disabled using programming bar code labels.
Table 2. Normal Operating Indicators
INDICATION DESCRIPTION LED
Power-up
Beep
Good Read
Beep
a
Green Spot
flashes
momentarily
Image
Capture
a
Except when in sleep mode or when a Good Read LED Duration other than 00
is selected
Quick Reference Guide
The reader is in
the process of
powering-up.
A label has been
successfully
scanned by the
reader.
Upon success-
ful read of a
label, the soft-
ware turns the
green spot on
for the time
specified
When ready to
capture image
LED and Beeper Indications
N/A
LED behavior is
configurable via
the feature
"Good Read:
When to Indi-
cate"
(see the PRG for
information.)
N/A
Blue light
flashes 2 times
when updating
BEEPER
Reader beeps
four times at
highest fre-
quency and vol-
ume upon
power-up.
The reader will
beep once at
current fre-
quency, volume,
tonal setting
and duration
upon a success-
ful label scan.
N/A
N/A
17