Mitsubishi Electric GOT2000 Series Connection Manual page 463

(2) Ethernet connection type: OP communication
(a) S7-200
Set the following parameters.
Item
Module Position
Module Address
Number of connections to configure for this
module
This is a Server connection: Servers
respond to connection request from remote
clients.
Local Properties (Server)
Remote Properties (Client)
Enable the Keep Alive function for this
connection.
(b) S7-300/400
Set the following parameters.
• When using the Ethernet module
Item
Properties
• When using the built-in Ethernet port
Item
Device name
Properties
(c) S7-1200
Set the following parameters.
Item
Ethernet addresses
Value in [Position] of the Ethernet module
IP Address PLC side IP address
Subnet mask PLC side subnet mask
Set "1" as the number of connected GOT.
Mark the check box.
Select [Accept all connection requests]
Set "10.00" in [TSAP].
Unmark the check box.
IP Address PLC side IP address
Subnet mask PLC side subnet mask
Set [PN-IO]
IP Address PLC side IP address
Subnet mask PLC side subnet mask
IP Address PLC side IP address
Subnet mask PLC side subnet mask
Setting details
Setting details
Setting details
Setting details
15.3 Ethernet Connection
15
15 - 21