Plc Side Setting (Mp3000 Series) - Mitsubishi Electric GOT2000 Series Connection Manual

6.3.6

PLC side setting (MP3000 series)

■1. Parameter settings
Make the parameter settings with a peripheral tool.
(1) Settings for the built-in MP3000 series Ethernet
Transmission parameter
setting
Transmission parameter
detailed setting
Message communication of
connection parameter setting
*1
(a) Auto receive function
Set the following items.
Item
Auto receive
Transmission buffer channel
Setting the slave I/F register
6 - 38
6.3 Ethernet Connection
POINT POINT POINT
YASKAWA PLC
For details of YASKAWA PLCs, refer to the following manuals.
➠
YASKAWA PLC user's Manual
Item
IP Address
Subnet Mask
Gateway IP Address
Device name
Engineering Port
Response Time
Count of Retry
Connection Number
Local Port
*1
Node IP Address
*1
Node Port
Connection Type
Protocol Type
Code
Detail
Node Name
Set the same the Node IP Address (Remote Station's IP Address) and the Node Port (Remote Station's Port Number) as the
Local IP Address and the Local Port (Local Station's Port Number) on the GOT side.
For the Local IP Address and the Local Port (Local Station's Port Number) on the GOT side, refer to the following.
➠
6.3.3 ■4. Ethernet setting
<When auto receive function>
Valid
<When using ladder program to receive messages>
Invalid
Set value
[ ].[ ].[ ].[ ]
[ ].[ ].[ ].[ ]
[ ].[ ].[ ].[ ]
Arbitrary
256 to 65535
0
0
1
10500
[ ].[ ].[ ].[ ]
[ ]
UDP (recommended)
Extended MEMOBUS
BIN
➠
(a) Auto receive function
Arbitrary
Set value
Set as necessary
Default
Range
PLC side IP address
PLC side setting
Up to 16 one-byte characters
For a connection with software MPE720
Not required for communication with GOT
Range: 1 to 20
256 to 65534
IP address of GOT
Port No. of GOT
TCP/UDP
Extended MEMOBUS, MEMOBUS,
MELSEC, None, MODBUS/TCP
RTU, BIN, ACII
Up to 32 one-byte characters
(16 two-byte characters)
Range
Valid / Invalid
1 to 10
-