Communication Detail Settings - Mitsubishi Electric GOT2000 Series Connection Manual

14.4.2

Communication detail settings

Make the settings according to the usage environment.
■1. SICK Flexi Soft
Item
Transmission Speed
Retry
Timeout Time
Delay Time
Set this item when change the transmission speed used for communication
with the connected equipment.
(Default: 115200bps)
Set the number of retries to be performed when a communication error
occurs.
(Default: 3times)
Set the time period for a communication to time out.
(Default: 3sec)
Set this item to adjust the transmission timing of the communication request
from the GOT.
(Default: 5ms)
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be changed on the Utility's [Communication setting]
after writing [Communication Settings] of project data.
For details on the Utility, refer to the following manual.
➠ GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
Description
14.4 GOT Side Settings
Range
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
0 to 5times
1 to 30sec
0 to 300 (ms)
14 - 5
14