Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

6.4

Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Device
Information
Network
6 - 42
6.4 Device Range that Can Be Set
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of word device.
Displays the device type and setting range which are selected in [Device].
Set the station number of the controller to be monitored.
Host Select this item for monitoring the host controller.
Select this for monitoring other controllers.
After selecting, set the station number of the controller to be monitored.
Other
NW No.: Set the network No.
Station No.: Set the station No.
POINT POINT POINT
Device settings of YASKAWA PLC
(when using CP-9200SH, CP-9300MS, MP-920, MP-930)
Set the coil device (MB) as follows:
(1) When setting as a bit device
Set the device using the format of word address (DEC) + bit number (HEX).
Device name
(2) When setting as a word device
Set the device using the format of word address (DEC).
Device name
Description
Device No.
Bit position (HEX)
Word address (DEC)
Device No.
Word address (DEC)