Ethernet Connection - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

4.3

Ethernet Connection

4.3.1
System Configuration for connecting to MICREX-SX SPH
MICREX-SX SPH
PLC
Ethernet
Model
name
interface module
SPH200
SPH300
NP1L-ET1
SPH2000
SPH3000
SPH2000
-
SPH3000
*1
*2
*3
*4
4 - 30
4.3 Ethernet Connection
Ethernet
interface
module
Connection cable
*1
Cable model
*3
Connection diagram number
• 10BASE-T
Shielded twisted pair cable (STP) or
unshielded twisted pair cable (UTP):
Category 3, 4, and 5
• 100BASE-TX
Shielded twisted pair cable (STP):
Category 5 and 5e
The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver or other system equipment corresponding to the applicable Ethernet network
system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standards.
A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
Product manufactured by Fuji Electric Co., Ltd. For details of the product, contact Fuji Electric Co., Ltd.
GT25-W, GT2505-V does not support the option device.
Connection cable
Max.
distance
Option device
*2
- (Built into GOT)
100m
GT25-J71E71-
100
- (Built into GOT)
100m
GT25-J71E71-
100
Communication driver
GOT
Ethernet(
GOT
Number of connectable
*4
Model
When PLC: GOT is 1: N
The following shows the number
of GOTs for 1 PLC 128 or less
When PLC: GOT is 1: N
The following shows the number
of GOTs for 1 PLC 8 or less
When PLC: GOT is 1: N
The following shows the number
of GOTs for 1 PLC 128 or less
When PLC: GOT is 1: N
The following shows the number
of GOTs for 1 PLC 10 or less
), Gateway
FUJI
equipment

Advertisement

Table of Contents
loading

Table of Contents