Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

14.6 Device Range That Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Device
Information
Set the device name, device number, and bit number.
The bit number can be set only by specifying the bit of word device.
Displays the device type and its setting range selected in [Device].
POINT POINT POINT
(1) Device settings of SICK Safety controller
(a) Input (I), Output (Q)
Device
name
(b) Logic result (LQ), Logic input (LI)
Device
name
(c) EFI input (EI)
Device
name
(d) EFI output (EQ)
Device
name
Description
Input position (1 to 8)
Module number (1 to 12)
Bit position (0 to 7)
Byte number (0 to 3)
Byte number (0 to 3)
Device number (1 to 3)
EFI number (1 to 2)
Byte number (0 to 2)
EFI number (1 to 3)
14.6 Device Range That Can Be Set
14
14 - 7