Mitsubishi Electric GOT2000 Series Connection Manual page 127

(2) Settings by switch
Make the communication settings using each setting switch.
(a) Setting of the MODE
Make the MODE settings using the MODE switch.
Command-setting-type start-stop synchronization, nonsequence format
(b) Setting of the station No.
Make the station No. using RS-485 station No. switches.
(c) Connecting terminating resistors
Turn ON/OFF the terminating resistor using RS-485 terminating resistor ON/OFF switch.
RS-485 station No.
switches
(Front view) (Rear view)
MODE
Character configuration
switches
Terminator switch
MODE switch
Station No.
0 to 99
ON
4.2 Serial connection
Switch position
3
4 - 23
4