Mitsubishi Electric GOT2000 Series Connection Manual page 375

(2) Ethernet connection type: EtherNet/IP (AB Tag)
This section describes the Ethernet setting for the communication driver AB Control/CompactLogix (Tag).
Item
Host
N/W No.
*1
Station
Unit Type
IP Address
Port No.
Communication
Connection
Slot No.
*1 Each of [GOT Station] set in the communication detail setting and [Station] set in the Ethernet setting must be set to different
station numbers.
➠
■2. Communication detail settings
POINT POINT POINT
Ethernet setting for GT21 and GS
• Effective range of the Ethernet setting
Only [1] to [4] of the Ethernet setting can be used for the GT21 and the GS. Even though [5] or
later of the Ethernet setting is written to the GT21 and the GS, the setting is disabled on the
GT21 and the GS side.
• Range of the host station setting
Set a host station within the range of [1] to [4] of the Ethernet setting.
Description
The host is displayed. (The host is indicated with an asterisk (*).)
Set the network No. of the connected Ethernet module.
(Default: blank)
Set the station No. of the connected Ethernet module.
(Default: blank)
AB (Tag) (fixed)
Set the IP address of the connected Ethernet module.
(Default: blank)
44818 (fixed)
TCP (fixed)
Connection setup
(Default: UCMM)
Set the slot No. connected to the CPU module in the PLC module.
(Default: blank)
Only [1] to [4]
can be used.
1 to 239
1 to 64
AB (Tag) (fixed)
PLC side IP address
44818 (fixed)
TCP (fixed)
UCMM
Class3
0 to 20
10.3 Ethernet Connection
Range
―
10
10 - 23