Plc Side Setting - Mitsubishi Electric GOT2000 Series Connection Manual

■4. Ethernet setting
Item
Host
Net No.
*3
Station
Unit Type
*1
IP address
*2
Port No.
Communication format
*1
*2
*3
7.3.3

PLC side setting

Ethernet interface module
F3SP66 (built-in Ethernet interface)
F3SP67 (built-in Ethernet interface)
F3SP71-4N (built-in Ethernet interface)
F3SP71-4S (built-in Ethernet interface)
F3SP76-7S (built-in Ethernet interface)
7 - 26
7.3 Ethernet Connection
The host is displayed.(The host is indicated with an asterisk (*).)
Set the network No. of the connected Ethernet module.
(Default: blank)
Set the station No. of the connected Ethernet module.
(Default: blank)
YOKOGAWA (fixed)
Set the IP address of the connected Ethernet module.
(Default: blank)
Set the port No. of the connected Ethernet module.
(Default: 12289)
Select a communication protocol.
*1
(Default: UDP)
Set the same IP address and communication format as those of the PLC side.
Set the port No. of the host link service used on the PLC side.
Each of [GOT Station] set in the communication detail setting and [Station] set in the Ethernet setting must be set to different
station numbers.
➠ ■2.
Communication detail settings
POINT POINT POINT
YOKOGAWA PLC
For details of YOKOGAWA PLCs, refer to the following manuals.
➠
YOKOGAWA PLC user's Manual
Model name
Description
F3LE01-5T
F3LE11-0T
F3LE12-0T
Set value
―
1 to 239
1 to 64
YOKOGAWA (fixed)
PLC side IP
address
12289, 12291
UDP, TCP
Refer to
7.3.4
7.3.5
7.3.6