Mitsubishi Electric GOT2000 Series Connection Manual page 42

(2) [Extended Port], or [Port 2]
The following shows an example for [Extended Port].
Step 1.
Select [System] → [GOT Setup] → [GOT Ethernet Setting] → [GOT IP Address Setting] → [Extended
Port] from the menu.
Step 2.
Set the followings.
Item
Update GOT Ethernet extended port
setting
Enable Ethernet extended port
GOT IP Address
Subnet Mask
Select from GOT Setting List.
1 - 14
1.1 Setting the Communication Interface
Description
The GOT Ethernet extended port settings are applied on GOT.
Enable the ethernet extended port.
Set the IP address of the GOT IP Address.
(Default:192.168.5.22)
Set the subnet mask for the sub network. (Only for connection via router)
If the sub network is not used, the default value is set.
(Default: 255.255.255.0)
Select the GOT set in [GOT Setting List] dialog.
➠
GT Designer3 (GOT2000) Screen Design Manual
Range
-
-
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
-