Connecting To Ut100 Series - Mitsubishi Electric GOT2000 Series Connection Manual

8.5.2

Connecting to UT100 Series

■1. Communication settings
Make the communication settings by operating the key of the temperature controller.
Transmission speed
*1
Data bit
*1
Parity bit
*1
Stop bit
*1*2
Address
*1
Protocol selection
*1
*2
8.5.3 Connecting to UT2000 Series
■1. Communication settings
Make the communication settings using setting switches.
Transmission speed
*1
Data bit
*1
Parity bit
*1
Stop bit
*1*2
Station No.
Communication mode
*1
*2
■2. Settings by switch
(1) Settings of the transmission speed and the parity
Make those settings by operating the communication setting Rotary switch.
Switch position
8 - 34
8.5 Temperature Controller Side Setting
Item
Adjust the settings with GOT settings.
Avoid duplication of the address with any of the other units.
Item
Adjust the settings with GOT settings.
Avoid duplication of the station No. with any of the other units.
0
1
2
9600bps
7bits, 8bits
Even, odd, none
1bit, 2bits
1 to 99
0: PC link communication (without sum check)
1: PC link communication (with sum check)
9600bps
8bits (fixed)
Even, odd, none
1bit (fixed)
1 to 16
PC link communication mode
Transmission speed
9600bps
Set value
Set value
Communication mode
select DIP SW
Communication setting
Rotary switch
Station No. select
Rotary switch
Parity bit
None
Odd
Even