Precautions - Mitsubishi Electric GOT2000 Series Connection Manual

Step 7.
Downloading the project
• Execute [Build] - [Make].
(Same as when pressing the function key F9).
• Download after confirming that the compile error does not occur. Select [Download] in the project control
dialog displayed when [Online] - [Project control] is selected.
• When the download is completed, select [Cold] and start STARDOM.
7.2.12

Precautions

■1. Device range
When performing monitoring with the GOT connected to a YOKOGAWA PLC and setting devices for objects, use
devices within the device range of the YOKOGAWA PLC.
When a device outside the range is set on an object, an indefinite value is displayed on the object.
(No error is displayed in the system alarm.)
For details on the device range of YOKOGAWA PLCs, refer to the following manual:
➠
■2. Connecting to STARDOM
(1) Redundant system
When STARDOM is configured with a redundant system, the connection is not supported.
(2) System alarm
The PLC error does not appear in the system alarm.
(3) GOT clock control
Since the STARDOM does not have a clock function, the settings of [time adjusting] or [time broad cast] by GOT
clock control will be disabled.
7 - 22
7.2 Serial Connection
7.4 Device Range that Can Be Set