Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual
Graphic operation terminal
Hide thumbs
Also See for GOT2000 Series:
- Connection manual (1224 pages) ,
- User manual (654 pages) ,
- Hardware user manual (438 pages)
Table of Contents
Advertisement
7.4
Device Range that Can Be Set
The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Device
Information
Network
7 - 30
7.4 Device Range that Can Be Set
POINT
POINT
POINT
(1) When using YOKOGAWA PLC FA-M3
When YOKOGAWA PLC FA-M3 is used, the device range that can be used differs depending
on the PLC model selected by the GT Designer3.
Since [YOKOGAWA STARDOM/FA-M3] has larger device points that can be set than
[YOKOGAWA FA500/FA-M3], select [YOKOGAWA STARDOM/FA-M3] if a large device
points should be set.
(2) Devices to be set for an object
When a device outside the range is set for an object, an indefinite value is displayed on the
object.(No error is displayed in the system alarm.)
A device to be set for an object must be in the device range of YOKOGAWA PLC.
For details on the device range of YOKOGAWA PLCs, refer to the following manual:
➠
YOKOGAWA PLC user's Manual
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of word device.
File No.
Set the file No.
Displays the device type and setting range which are selected in [Device].
Set the station number of the controller to be monitored.
Set the CPU No. of the controller.
CPU No.
➠
(1) Setting of the CPU No.
Host
Select this item for monitoring the host controller.
Select this for monitoring other controllers.
After selecting, set the station number of the controller to be monitored.
Other
NW No.: Set the network No.
Station No.: Set the station No.
Description
Advertisement
Chapters
Table of Contents
