Mitsubishi Electric GOT2000 Series Connection Manual page 461

(2) Ethernet connection type: OP communication
This section describes the Ethernet setting for the communication driver SIEMENS OP (Ethernet).
Item
Host
Net No.
*2
Station
Unit Type
IP Address
Port No.
*1
Connection No./Rack No.
*1
Module Position/Slot No.
Communication
*1 Connection No./Rack No. and Module Position/Slot No. are unnecessary for S7-1200 OP.
*2 Each of [GOT Station] set in the communication detail setting and [Station] set in the Ethernet setting must be set to different
station numbers.
➠
■2. Communication detail settings
POINT POINT POINT
Ethernet setting for GT21 and GS
(1) Effective range of the Ethernet setting
(2) Range of the host station setting
Description
The host is displayed. (The host is indicated with an asterisk (*).)
Set the network No. of the connected Ethernet module.
(Default: blank)
Set the station No. of the connected Ethernet module.
(Default: blank)
Set the PLC type to be connected.
Set the IP address of the connected Ethernet module.
(Default: blank)
102 (fixed)
Set the Connection No./Rack No. set on the PLC side.
(Default: 0)
Set the Module Position/Slot No. set on the PLC side.
(Default)
S7-200 OP: 0
S7-300/400 OP: 2
TCP (fixed)
Only [1] to [4] of the Ethernet setting can be used for the GT21 and the GS. Even though [5]
or later of the Ethernet setting is written to the GT21 and the GS, the setting is disabled on
the GT21 and the GS side.
Set a host station within the range of [1] to [4] of the Ethernet setting.
Only [1] to [4]
can be used.
Set value
―
1 to 239
1 to 254
S7-200 OP
S7-300/400 OP
S7-1200 OP
PLC side IP
address
102 (fixed)
0 to 7
S7-200
OP: 0 to 6
S7-300/400
OP: 0 to 31
TCP (fixed)
15.3 Ethernet Connection
15
15 - 19