Mitsubishi Electric GOT2000 Series Connection Manual page 131

(2) Settings by switch
Make the communication settings using each setting switch.
(a) Setting of the MODE
Make the MODE settings using the MODE switch.
Command-setting-type start-stop synchronization, nonsequence format
RS-232C 1:1
Command-setting-type start-stop synchronization, nonsequence format
RS-232C 1:1,
and RS-485 1:N
Command-setting-type start-stop synchronization, nonsequence format
RS-485 1:N
(b) Setting of the station No.
Make the station No. using RS-485 station No. switches.
(c) Connecting terminating resistors
Turn ON/OFF the terminating resistor using RS-485 terminating resistor ON/OFF switch.
Character configuration
switches
Baudrate setting switch
MODE switch
T-link channel switch
T-link terminating resistor
ON/OFF switch
MODE
RS-485 terminating resistor
ON/OFF switch
RS-485 station No.
switches
Station No.
0 to 99
ON
4.2 Serial connection
Switch position
1
2
3
4 - 27
4