Mitsubishi Electric GOT2000 Series Connection Manual page 137

■4. Ethernet setting
Item
Host
Net No.
*2
Station
Unit Type
*1
IP address
Port No.
Communication format
*1 Connection with the PLC is unavailable if the IP address is the default value. Set the value to the IP address of the PLC to be
connected.
*2 Each of [GOT Station] set in the communication detail setting and [Station] set in the Ethernet setting must be set to different
station numbers.
➠ ■2.
Description
The host is displayed. (The host is indicated with an asterisk (*).)
Set the network No. of the connected Ethernet module.
(Default: blank)
Set the station No. of the connected Ethernet module.
(Default: blank)
FUJI (fixed)
Set the IP address of the connected Ethernet module.
(Default: 192.168.0.1
Set the port No. of the connected Ethernet module.
(Default: 507)
TCP (fixed)
Communication detail settings
Set value
―
1 to 239
1 to 254
FUJI (fixed)
PLC side IP address
251 to 65531
TCP (fixed)
4.3 Ethernet Connection
4
4 - 33