Plc Side Setting (Mp3000 Series) - Mitsubishi Electric GOT2000 Series Connection Manual

6.3.6

PLC side setting (MP3000 series)

■1. Parameter settings
Make the parameter settings with a peripheral tool.
(1) Settings for the built-in MP3000 series Ethernet
Transmission parameter
setting
Transmission parameter
detailed setting
Message communication of
connection parameter setting
*1 Set the same the Node IP Address (Remote Station's IP Address) and the Node Port (Remote Station's Port Number) as the
Local IP Address and the Local Port (Local Station's Port Number) on the GOT side.
For the Local IP Address and the Local Port (Local Station's Port Number) on the GOT side, refer to the following.
➠
(a) Auto receive function
Set the following items.
Item
Auto receive
Transmission buffer channel
Setting the slave I/F register
POINT POINT POINT
YASKAWA PLC
For details of YASKAWA PLCs, refer to the following manuals.
➠ YASKAWA PLC user's Manual
Item
IP Address
Subnet Mask
Gateway IP Address
Device name
Engineering Port
Response Time
Count of Retry
Connection Number
Local Port
*1
Node IP Address
*1
Node Port
Connection Type
Protocol Type
Code
Detail
Node Name
6.3.3 ■4. Connected Ethernet Controller Setting
<When auto receive function>
Valid
<When using ladder program to receive messages>
Invalid
Set value
[ ].[ ].[ ].[ ] PLC side IP address
[ ].[ ].[ ].[ ]
PLC side setting
[ ].[ ].[ ].[ ]
Arbitrary Up to 16 one-byte characters
256 to 65535 For a connection with software MPE720
0
Not required for communication with GOT
0
1 Range: 1 to 20
10500 256 to 65534
[ ].[ ].[ ].[ ] IP address of GOT
[ ] Port No. of GOT
UDP (recommended) TCP/UDP
Extended MEMOBUS, MEMOBUS,
Extended MEMOBUS
MELSEC, None, MODBUS/TCP
BIN RTU, BIN, ACII
➠
(a) Auto receive function
Up to 32 one-byte characters
Arbitrary
(16 two-byte characters)
Set value
Set as necessary
Default
6.3 Ethernet Connection
Range
6
Range
Valid / Invalid
1 to 10
-
6 - 39