Power Wiring; Power Wiring And Grounding - Mitsubishi Electric GOT2000 Series User Manual

9.2

Power Wiring

9.2.1

Power wiring and grounding

GOT power is supplied from the external power.
In addition, the following table shows the input power supply voltage and the consumed current.
Item
Input power supply voltage
Power consumption
At backlight off
Inrush current
Example of feeding with external power
Connect the external cable to the external power.
Grounding
(100 or less)
*1 Cautions for grounding with the input power
• When the input powers are the same
When the input powers of the PLC main unit and external power (24VDC) are the same, connect the FG cable of the GOT
and the ground terminal of the PLC (
• When the input powers are differen
When the input powers are different (PLC: 200VAC, Power: 100VAC), connect the ground terminal (
FG cable of GOT separately and carry out the independent grounding.
Pin layout
Model name
Connector Conversion Box
*1 Be sure to ground FG terminal.
24VDC(+10% -15%)
11.6W or less (480mA/24VDC)
8.2W or less (340mA/24VDC)
30A or less (at max. load) 2ms
To the Handy GOT operation switch
24+ COM X0 X1
PLC
External
PLC power
supply
Grounding
(100 or less)
) and carry out the grounding.
AC200V
External
PLC
power
supply
Grounding
(100
24VDC+
Terminal block 1
1
Specifications
GT2506HS-VTBD
X2 X3 X4
*1
Grounding
(100 or less)
Handy
GOT
FG
AC100V
Handy
GOT
FG
or less)
Terminal No.
24VDC-
Terminal block 1
3

9.2 Power Wiring

Handy GOT
FG 24V- 24V+
External
power supply
) of PLC and the
FG
*1
Terminal block 1
2
9 - 5
9