Step 4.
Close the SD card cover until it clicks.
6.11.3
Removing the battery from GT2510-WX or GT2507-W
The following shows the battery removal procedure, taking GT2510-WX as an example.
Step 1.
Make sure that the GOT power is off.
Step 2.
The battery is stored in the GOT rear face.
Open the battery cover as shown below.
Step 3.
After removing the battery from the battery holder of the GOT, unplug the connector.
6 - 64
6.11 Removing the Battery
SD card cover
Battery cover
Battery
Connector
Battery cover
Battery
Connector