Installing And Removing The Panel-Mounted Usb Port Extension - Mitsubishi Electric GOT2000 Series User Manual

■2. Precautions on installing the panel-mounted USB port extension
• Run power lines, servo amplifier drive wires, and panel-mounted USB port extensions so that they do not cross each
other.
• Install the panel-mounted USB port extension away from noise sources such as equipment.
• Do not twist, bend at a sharp angle or a right angle, and stretch the panel-mounted USB port extension since the
cable may be broken.
• Install it while considering the following control panel inside dimensions.
Depth dimensions of the GOT
Dimension of the protruding cable
• Insert the USB plug part of the tip of the panel-mounted USB interface (Host) extension securely to the USB port of
the GOT.
The USB plug part may be inserted loosely or unplugged by power of vibrations, impacts, or pulling.
Fix the cable to the structures inside the panel or the preventive hole from removing the USB cable of the GOT main
unit by using the banding band or others.
6 - 88

6.16 Installing and Removing the Panel-Mounted USB Port Extension

80 (3.15)
or more
Unit: mm (inch)
80 (3.15) or more
Unit: mm (inch)