Gt25-W - Mitsubishi Electric GOT2000 Series User Manual

3.3.2

GT25-W

■1. GT25 Input power supply 24 V DC
Item
Power supply voltage
Under the maximum
load
Power
Main unit
consumption
Main unit (Backlight
OFF)
Inrush current
Permissible instantaneous power
failure time
Noise immunity
Withstand voltage
Insulation resistance
Applicable wire size
Applicable solderless terminal
Applicable tightening torque
(Terminal block terminal screw)
3 - 46
3.3 Specifications of Power Supply Section
GT2510-WXTBD
GT2510-WXTSD
16 W or less
9 W or less
5 W or less
59 A or less (2 ms, ambient temperature: 25 °C, under the maximum load)
Noise voltage: 500 Vp-p, noise width: 1 μs, measured by a noise simulator with noise frequency ranging from 25 Hz
350 V AC for 1 minute across power terminals and earth
500 V DC across power terminals and earth, 10 MΩ or more by an insulation resistance tester
Solderless terminal for M3 screw RAV1.25-3, V2-S3.3, V2-N3A, FV2-N3A
Specifications
24 V DC (+25%, -20%)
5 ms or less
to 60 Hz.
2 2
0.75 mm to 2 mm
0.5 N·m to 0.8 N·m
GT2507-WTBD
GT2507-WTSD
16 W or less
9 W or less
5 W or less