Conforming Standards In The Low Voltage Directive - Mitsubishi Electric GOT2000 Series User Manual

*1 The GOT is an open type device (designed to be integrated in equipment).
Make sure to install the GOT on a control panel.
This test item is conducted in the condition where the GOT is installed on a control panel and combined with the MITSUBISHI
ELECTRIC PLC.
*2 The length of a sound output cable must be 30 m or less.
*3 QP: Quasi-peak value, Mean: Average value
*4 This test item is conducted in the following conditions.
• 30 MHz to 230 MHz
QP: 40 dBμV/m (measured at 10 m)
• 230MHz to 1000MHz
QP: 47 dBμV/m (measured at 10 m)
5.1.2

Conforming standards in the Low Voltage Directive

The GOT complies with the following standards in the Low Voltage Directive.
• EN61131-2: Programmable controllers - Equipment requirements and tests
• EN60950-1: Information technology equipment - Safety
5 - 3
5.1 Overview
5