Mitsubishi Electric GOT2000 Series User Manual page 142

■5. Cable
(1) MELSECNET/H (coaxial cable), and video connections
Use a double shielded coaxial cable.
The 5C-2V connector plug is applicable to the double shielded coaxial cable.
Connect the 5C-2V connector plug to the coaxial cable inside the double shielded coaxial cable.
Ground the shielded part outside the double shielded coaxial cable as shown in the following figure.
Double-shielded coaxial cable
Mitsubishi cable: 5C-2V-CCY
(2) CC-Link IE Field Network connection
Use the following cable dedicated to the CC-Link IE Field Network.
Mitsubishi Electric System & Service Co., Ltd.
(3) Other connections
For the details of the cables used, refer to the following manual.
➠
➠
5 - 10
5.2 EMC Directive Requirements
Grounding
Manufacturer
GOT2000 Series Connection Manual For GT Works3 Version1 compatible for a controller used
POINT POINT POINT
Fabricating cables
To comply with the EMC Directive, fabricate cables (including user-created cables).
For how to fabricate a cable, refer to the following.
GOT2000 Series Connection Manual For GT Works3 Version1 compatible for a controller used
Enlarged view of cable
Internal
conductor Insulation
material
Model
SC-E5EW-S□M
Sheath
Sheath
External
conductor
External
conductor
(Grounding)