Download  Print this page

Power Supply Wiring; Wiring Example; Grounding The Got - Mitsubishi Electric GT14 User Manual

Graphic operation terminal.
Hide thumbs

Advertisement

7.1 Power Supply Wiring

7.1.1

Wiring example

Connect the power supply to the power terminals on the back panel of the GOT.
2
Use 0.75mm
or thicker cables to avoid voltage drop and tighten the terminal screw with the specified torque securely.
Grounding
(100
or less)
7.1.2

Grounding the GOT

About grounding
Make sure to carry out the following for grounding.
• Carry out the independent grounding if possible.
Apply the class D grounding. (Keep the grounding resistance within 100
• If the independent grounding is impossible, carry out the shared grounding as shown in fig.2) below.
GOT
Grounding
(100
(1) Independent ground
...... Best condition
• Use the cable of 2mm
Set the grounding point closer to the GOT to make the grounding cable short as possible.
7 - 2
7. WIRING
7.1 Power Supply Wiring
PC and external
device connection
cables
+
24VDC
-
power supply
Other
GOT
device
or less)
(2) Shared grounding
...... Good condition
2
or more for grounding.
Other
device
Grounding
(100
or less)
or less.)
Other
GOT
device
(3) Common grounding
...... Not allowed

Advertisement

Table of Contents

   Also See for Mitsubishi Electric GT14

   Related Manuals for Mitsubishi Electric GT14

This manual is also suitable for:

Got 1000

Comments to this Manuals

Symbols: 0
Latest comments: