Mitsubishi Electric GOT2000 Series User Manual page 247

(3) Installation on the DIN rail.
Install the Connector Conversion Box on the DIN rail with using its DIN rail hook.
Applicable DIN rail DIN46277 (width: 35mm)
The clearance between screws for installing the DIN rail should be 150mm or less.
Step 1.
Pull out the hook for DIN rail.
Step 2.
Adapt the upper side of the DIN rail installation slot to the DIN rail.
Step 3.
Lock the hook for DIN rail while forcing the Connector Conversion Box on the DIN rail.
When installing the DIN rail, please fix the cables.
Otherwise, the hook for DIN rail and other parts may be damaged by the cable load.
DIN rail depth
more than 10mm (0.4 "inch )
ON
OFF
ON
OFF
7.1 Connector Conversion Box
7
7 - 7