Mitsubishi Electric GOT2000 Series User Manual page 255

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

• Station No. switching device setting

Tick the check box of [Use Station No. Switching] to set the device specifying the station No. of the

connected PLC.

Here, an example when the GOT internal device GD500 is set is explained.

Set the trigger action function.

• Operation trigger setting

Set the GOT internal device GB40 (always ON during the GOT operation) as the conditional trigger of

the trigger action function.

If [Common] → [Trigger Action] from the menu is selected, the [Trigger Action] dialog box is displayed.

7.1 Connector Conversion Box

Troubleshooting