Mitsubishi Electric GOT2000 Series User Manual page 262

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

■2. Removal procedure of external cable
Step 1.
Make sure that the GOT power is off.
Step 2.
Pull up the lock lever with inserting a flat-blade screwdriver into the release hole of the lock lever.
Step 3.
The external cable can be removed by pulling the whole plug connector while shifting the coupling of the
plug connector to the cable side.
7 - 22
7.3 Overview of Communication Cable
Flat screwdriver
Coupling

Advertisement

Table of Contents
loading

Table of Contents