Gt21 - Mitsubishi Electric GOT2000 Series User Manual

6.13.4

GT21

Step 1.
Touch [[Utility main menu] → [Data control] → [SD card access] → [Permissions], and select [Access
inhibit].
➠
Check that the SD card access LED turns off.
When the LED is off, the SD card can be inserted or removed at the GOT power-on.
Step 2.
Open the SD card cover, and remove the SD card.
6 - 78
6.13 Removing the SD Card
GOT2000 Series User's Manual (Utility)
POINT POINT POINT
(1) Cautions for removing the SD card
While the SD card access LED is on, do not remove the SD card or power off the GOT. Doing
so results in damage to the SD card and files.
When removing the SD card from the GOT, make sure to hold the SD card as it may pop out.
(2) Enabling or disabling the SD card access when the SD card cover is removed (GT27
and GT25 only)
The SD card access is enabled or disabled by closing or opening the SD card cover. If the
SD card cover is faulty and remains opened, the SD Card Access Switch Status Control
(GS1820.b0) turns on.
To enable or disable the SD card access, turn on or off GS1820.b1.