Mitsubishi Electric GOT2000 Series User Manual page 189

■3. GT2505-V
For the vertical installation, check that the vertical installation arrow mark put on the GOT rear face points upward.
Step 1.
Install a packing to the packing installation groove on the GOT rear face.
Push the thin packing to the packing installation groove.
Step 2.
Insert the GOT rear face into the panel opening.
Step 3.
Fix the GOT.
• Insert the hook of an installation fitting (supplied) into the mounting hole of the GOT.
• Tighten the supplied screws within the specified torque range (0.36 N•m to 0.48 N•m) to fix the GOT
Fix the GOT using 4 fittings at the top and the bottom of the GOT.
Packing
Enlarge
Packing
Packing
installation groove
Enlarged view
Panel opening
Installation
fitting
Mounting screw
6.6 Installing the GOT
6
6 - 37