Gt2107) - Mitsubishi Electric GOT2000 Series User Manual

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

■2. For GT2107

Install the USB cable to a USB interface (Host/device) on the GOT rear face.

Insert a cable clamp to the mounting hole for a cable clamp shown in the following figure and push it until

you hear a clicking sound. For the direction that the band goes through, refer to the arrow in the figure.

(Cable clamp used in this example: RSG-130-V0, KITAGAWA INDUSTRIES CO.,LTD.)

Pass the USB cable through a hole of the cable clamp and pull the band to fix the cable.

6.15 Installing and Removing the USB cable (GT27, GT25, GT23, GT2107)

Troubleshooting