Removing The Battery From Gt2506Hs-V - Mitsubishi Electric GOT2000 Series User Manual

Step 4.
Push and close the battery cover until it clicks.
6.11.4

Removing the battery from GT2506HS-V

The following shows the battery removal procedure.
Step 1.
Make sure that the GOT power is off.
Step 2.
Loosen the environmental protection back cover screws at two points on GOT rear face to remove the
cover.
Step 3.
Remove the battery from the GOT and unplug the connector.
Step 4.
Attach the environmental protection back cover and tighten the screws within the specified torque range
(0.36 N•m to 0.48 N•m).
Battery cover
Connector for
battery connection
Battery
Environmental
protection
back cover
screw
Environmental
protection
back cover
screw
6.11 Removing the Battery
6
6 - 65