Power Supply Wiring; Wiring Example; Grounding The Got - Mitsubishi Electric GOT1000 GT14 User Manual

7.1 Power Supply Wiring

7.1.1

Wiring example

Connect the power supply to the power terminals on the back panel of the GOT.
2
Use 0.75mm or thicker cables to avoid voltage drop and tighten the terminal screw with the specified torque securely.
Grounding
(100 or less)
7.1.2

Grounding the GOT


About grounding
Make sure to carry out the following for grounding.
• Carry out the independent grounding if possible.
Apply the class D grounding. (Keep the grounding resistance within 100
• If the independent grounding is impossible, carry out the shared grounding as shown in fig.2) below.
GOT
Grounding
(100
(1) Independent ground
...... Best condition
• Use the cable of 2mm
Set the grounding point closer to the GOT to make the grounding cable short as possible.
7 - 2
7. WIRING
7.1 Power Supply Wiring
PC and external
device connection
cables
+
24VDC
-
power supply
Other
GOT
device
or less)
(2) Shared grounding
...... Good condition
2
or more for grounding.
Other
device
Grounding
(100 or less)
or less.)
Other
GOT
device
(3) Common grounding
...... Not allowed