Mitsubishi Electric GOT2000 Series User Manual page 254

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

Make the controller settings of the project data to be transferred to the handy GOT.

• Controller setting

Make the settings to connect the GOT to Ethernet.

Set all PLCs which the GOT may be connected to via Ethernet.

Here, an example when [Net No.] is fixed to 1 is explained.

Make the MODBUS/RTU communication settings using RS232 to connect the GOT to the connector

conversion box.

7.1 Connector Conversion Box

Troubleshooting