Mitsubishi Electric GOT2000 Series User Manual page 256

Click the [Add...] button in the Project tab.
Set [ON] for [Trigger Type] of Trigger 1 in the Trigger tab.
Set [GB40] for [Trigger Device].
• Operation setting
Store the rotary switch value into the station No. switching device (D500).
The station No. switching device value is unsigned 16-bit data where the upper 8 bits are the network
No. and the lower 8 bits are the station No.
Set the operation in the following setting method.
• Set [Data Set 16bit] for [Action] and [Unsigned BIN16] for [Data] in the Action tab.
• Set a station No. switching device [GD500] to [Device].
• To set the rotary switch value of the Connector Conversion Box, tick the check box of [Indirect].
Click the [...] button to display the [Select CH No.] dialog box.
7 - 16
7.1 Connector Conversion Box