Panel-Mounted Usb Port Extension; Applicable Panel-Mounted Usb Port Extension; Parts Name; Installing Procedure - Mitsubishi Electric GT14 User Manual

8.10 Panel-Mounted USB Port Extension

GT14-C10EXUSB-4S panel-mounted USB port extension is a waterproof extension cable of the USB.
It is used to pull out the USB interface (host) on the back of GT14 to the surface of the control panel.

8.10.1 Applicable panel-mounted USB port extension

The following panel-mounted USB port extension is applicable for GT14.
Model name
GT14-C10EXUSB-4S

8.10.2 Parts name

The following shows the parts name of panel-mounted USB port extension.
USB plug

8.10.3 Installing procedure


Installed to panel
Install the panel-mounted USB port extension as follows with attention to a curve or a distortion of waterproof cap,
seal, and nut.
Panel thickness: 2 to 4mm
(0.08 to 0.16inch)
Seal
• The panel thickness is 2.0 to 4.0mm.
• For panel-mounted USB port extension, the panel surface with waterproof cap is compatible with IP67f.
• Tightening torque of nut is 0.294 to 0.343N•m. Overtightening or undertightening may disable the waterproof effect.
• Tighten the waterproof cap properly when the cable is not used.
8 - 14
8. OPTION
8.10 Panel-Mounted USB Port Extension
Cable
Ferrite core
Model name label
Nut
Waterproof
cap
Description
Panel-mounted USB port extension
Nut
Seal
19.4±0.1
(0.77
Panel Cutting Dimensions
Cap installation chart
Waterproof cap
"
±0.01)
Unit: mm (inch)