Measured Value Expander Block Range_Xp - ABB REG670 Applications Manual

Section 23
Basic IED functions
23.3
23.3.1
724
changed by the customer. They can only be viewed. The settings are found in the local
HMI under Main menu/Diagnostics/IED status/Product identifiers
The following identifiers are available:
• IEDProdType
• Describes the type of the IED. Example: REL670
• ProductDef
• Describes the release number from the production. Example: 2.1.0
• FirmwareVer
• Describes the firmware version.
• The firmware version can be checked from Main menu/Diagnostics/IED
status/Product identifiers
• Firmware version numbers run independently from the release production
numbers. For every release number there can be one or more firmware
versions depending on the small issues corrected in between releases.
• ProductVer
• Describes the product version. Example: 2.1.0
1 is the Major version of the manufactured product this means, new platform of the
product
2 is the Minor version of the manufactured product this means, new functions or new
hardware added to the product
3 is the Major revision of the manufactured product this means, functions or hardware is
either changed or enhanced in the product
• IEDMainFunType
• Main function type code according to IEC 60870-5-103. Example: 128
(meaning line protection).
• SerialNo
• OrderingNo
• ProductionDate

Measured value expander block RANGE_XP

Identification
Function description
Measured value expander block
Generator protection REG670 2.2 IEC and Injection equipment REX060, REX061, REX062
IEC 61850 IEC 60617
identification identification
RANGE_XP -
1MRK 502 071-UEN -
ANSI/IEEE C37.2
device number
-
Application manual