Application - ABB REG670 Applications Manual

1MRK 502 071-UEN -
16.3.2
16.3.3
16.4
16.4.1
16.4.1.1
16.4.1.2
16.5
16.5.1
Generator protection REG670 2.2 IEC and Injection equipment REX060, REX061, REX062
Application manual

Application

Group alarm logic function ALMCALH is used to route alarm signals to different
LEDs and/or output contacts on the IED.
ALMCALH output signal and the physical outputs allows the user to adapt the alarm
signal to physical tripping outputs according to the specific application needs.
Setting guidelines
Operation: On or Off
Logic for group alarm WRNCALH
Identification
Function description
Logic for group warning
Application
Group warning logic function WRNCALH is used to route warning signals to LEDs
and/or output contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to
adapt the warning signal to physical tripping outputs according to the specific
application needs.
Setting guidelines
OperationOn or Off
Logic for group indication INDCALH
Identification
Function description
Logic for group indication
IEC 61850 IEC 60617
identification identification
WRNCALH -
IEC 61850 IEC 60617
identification identification
INDCALH -
Section 16
Logic
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
607