Configuration Using the Web Interface
Aggregation Information
The Port Trunk - Aggregation Information page shows the status of port aggregation. Once the aggregation
ports are negotiated, you see the following status.
Aggregation Status Page
Group ID
Type
Aggregated Ports
Individual Ports
Link Down Ports
Reload
72 - Aggregation Information
Displays Trunk 1 to Trunk 5 set up.
The Type is Static or LACP. Static means that LACP is disabled and
configured statically by the Administrator.
When LACP links, you can see the member ports in the Aggregated
column.
When LACP is enabled, member ports of LACP group that are not
connected to the correct LACP member ports are displayed in the
Individual column.
When LACP is enabled, member ports of LACP group that are not
linked up are displayed in the Link Down column.
Click Reload to reload aggregation settings.
RocketLinx ES8509-XT User Guide: 2000557 Rev. D